Bench&Brace

Unverified draft - do not rely on this page

This record has not passed review. It is published here so the gap is visible and so a reviewer can work on it, and it is excluded from search engines. Treat every figure on it as unconfirmed.

  • Confirm sole length and iron width against Stanley catalogue plates
  • Confirm this model's own production start and end years
  • Photograph the toe stamp for the identification section

Stanley

Stanley No. 24 Transitional Smooth Plane

A wood-bottomed smoothing plane: beech body, iron top casting, and the Bailey depth and lateral adjusters.

  • 1869–1943
  • Transitional Plane
  • low confidence
  • unverified draft
Specifications
ModelNo. 24
Production1869–1943
Bodybeech body with cast iron top casting
Handlesbeech knob and tote

How to identify it

  • Wooden sole with an iron casting screwed to the top, carrying the frog, lever cap and adjusters.
  • The model number is usually stamped into the toe of the wooden body ahead of the knob, and is often faint or worn away entirely.
  • Check the mouth for wear and blow-out before anything else. It is the one fault on a transitional that is hard to fix well.
Photograph needed: Stanley No. 24 Transitional Smooth Plane - overall view, plus a close-up of the toe and bed markings
No image is published here until its rights are cleared. Sourcing policy.

Buying and using

Transitionals are the cheapest way into a pre-war Stanley with a proper adjuster. Collector interest is low, so buy on the condition of the body and the iron rather than on rarity.

Sources

Others in this family