Unverified draft - do not rely on this page

This record has not passed review. It is published here so the gap is visible and so a reviewer can work on it, and it is excluded from search engines. Treat every figure on it as unconfirmed.

Confirm production start and end years against a catalogue run
Confirm whether all examples are truly fixed-mouth across the whole run

Stanley

Stanley No. 60 Low Angle Block Plane

The fixed-mouth sibling of the 60-1/2: same low bed angle, same iron, no adjustable toe piece.

1898–1950
Block Plane
low confidence
unverified draft

Specifications
Model	No. 60
Production	1898–1950
Sole length	6"
Cutter width	1-3/8"
Bed angle	12 degrees
Mouth	fixed

How to identify it

6 inch low-angle body with no eccentric lever at the front.

Photograph needed: Stanley No. 60 Low Angle Block Plane - overall view, plus a close-up of the toe and bed markings

No image is published here until its rights are cleared. Sourcing policy.

The same size from other makers

These do the same job at the same size. Parts do not interchange between makers, but the shaving does not know the difference - and where one maker commands a collector premium, another usually does not.

Maker	Called	Made
Stanley	No. 9-1/2	1873–2000
Stanley	No. 18	1888–1950
Stanley	No. 60-1/2	1898–2000
Stanley	No. 95	1911–1970
Stanley	No. 93	1898–1970

Every size, every maker

Sources

reference-site
Patrick Leach's Blood & Gore (Stanley plane model-by-model commentary) — Patrick Leach

Others in this family

Stanley No. 9 Cabinetmaker's Block Plane

1870–1943 · 10" · 2"

A big, heavy block plane made for shooting mitres and trimming end grain on cabinet work.
Stanley No. 9-1/2 Block Plane

1873–2000 · 6" · 1-5/8"

The standard-angle block plane, and the pattern every other manufacturer copied.
Stanley No. 15 Block Plane

1876–1955 · 7" · 1-5/8"

A No. 9-1/2 stretched by an inch.
Stanley No. 18 Knuckle-Joint Block Plane

1888–1950 · 6" · 1-5/8"

A 9-1/2 with the knuckle-joint lever cap: a hinged nickel-plated cap that folds flat into the palm.
Stanley No. 19 Knuckle-Joint Block Plane

1888–1950 · 7" · 1-5/8"

The seven-inch knuckle-cap block plane: a No. 15 with the folding cap, or a No. 18 with an extra inch, depending which way you come at it.
Stanley No. 60-1/2 Low Angle Block Plane

1898–2000 · 6" · 1-3/8"

The low-angle block plane, and probably the single most useful vintage Stanley you can buy for under fifty dollars.
Stanley No. 61 Low Angle Block Plane

1914–1935 · 6" · 1-3/8" · draft

A short-lived low-angle block plane in the 60 series.
Stanley No. 62 Low Angle Jack Plane

1905–1942 · 14" · 2"

A jack-sized plane built like a block plane: bevel-up iron on a twelve-degree bed, adjustable mouth, no frog.