Stanley bench plane type study
Stanley Type 16 (1933–1941)
Raised ring cast around the knob seat. 'MADE IN USA' present. Sweetheart iron until about 1935, plain STANLEY after.
- 1933–1941
- high confidence
Fastest way to spot one
- Raised ring cast around the knob seat
- 'MADE IN USA' present
- Sweetheart iron until about 1935, plain STANLEY after
Features in detail
| Knob seat | A raised cast ring surrounds the knob seat, and the knob is bored to match. Present on everything afterwards. high |
|---|---|
| Iron logo | The SW Sweetheart logo is dropped around 1935, so a Type 16 body may carry either a Sweetheart or a plain STANLEY iron - both are correct. high |
Notes
A long type. If the ring is there, the war features are not, and the finish is good japanning, you are in 1933-1941.
Before you trust this
Type dates are approximate and adjacent types overlap. Stanley emptied parts bins before opening new ones, so a plane can legitimately carry features from two types at once. Date the body casting, treat the iron and hardware separately, and expect a window rather than a year.
Go back to the full type study, or read the dating marks table.
Sources
- reference-site
Stanley Bench Plane Type Study (Types 1-20) — Patrick Leach - book
Stanley Tools: Guide to Identity and Value — John Walter
Models this type applies to
-
Stanley No. 1 Smoothing Plane
The smallest bench plane Stanley made, and the one every collector wants.
-
Stanley No. 2 Smoothing Plane
The smallest Bailey with a tote.
-
Stanley No. 3 Smoothing Plane
A smoother one size down from the No. 4, and the size most people find comfortable once they have used both.
-
Stanley No. 4 Smoothing Plane
The most-produced bench plane in history and the default smoother in every workshop that has one.
-
Stanley No. 4-1/2 Smoothing Plane
A wide, heavy smoother.
-
Stanley No. 5 Jack Plane
The jack plane - the jack of all trades, and the plane most likely to be in a box at an estate sale.
-
Stanley No. 5-1/4 Junior Jack Plane
A narrow, short jack sold heavily into school manual-training programmes.
-
Stanley No. 5-1/2 Jack Plane
A wide, heavy jack.
-
Stanley No. 6 Fore Plane
The fore plane sits between the jack and the jointer.
-
Stanley No. 7 Jointer Plane
The standard jointer, and the plane that makes hand-cut edge joints possible.
-
Stanley No. 8 Jointer Plane
The largest Bailey bench plane: two feet of sole and the widest iron in the range.
-
Stanley No. 40 Scrub Plane
A dedicated roughing plane: narrow, thick, heavily cambered iron and a wide open mouth, made to take deep bites across the grain and reduce a board fast.
-
Stanley No. 602 Bedrock Smoothing Plane
The smallest Bedrock, and after the No. 1 the most sought-after Stanley bench plane.
-
Stanley No. 603 Bedrock Smoothing Plane
The Bedrock equivalent of the Bailey No. 3: an eight-inch smoother with the full-contact frog seat and the heavier castings of the premium line.
-
Stanley No. 604 Bedrock Smoothing Plane
The Bedrock No. 4.
-
Stanley No. 604-1/2 Bedrock Smoothing Plane
A wide, heavy Bedrock smoother - the 4-1/2 pattern in the premium line, and the plane to reach for on figured hardwood if money is no object.
-
Stanley No. 605 Bedrock Jack Plane
The Bedrock jack, and the most-produced plane in the line after the 604.
-
Stanley No. 605-1/4 Bedrock Junior Jack Plane
A narrow junior jack in the Bedrock line, introduced late and discontinued with everything else in 1943.
-
Stanley No. 605-1/2 Bedrock Jack Plane
The wide Bedrock jack: fifteen inches of sole, a wide iron and the full-contact frog seat.
-
Stanley No. 606 Bedrock Fore Plane
The Bedrock fore plane.
-
Stanley No. 607 Bedrock Jointer Plane
The Bedrock jointer: 22 inches of heavy casting with the full-contact frog.
-
Stanley No. 608 Bedrock Jointer Plane
The biggest Bedrock: two feet of sole, the widest iron, and the heaviest bench plane Stanley catalogued.